BURGLAR-RESISTANT SECURITY SLIDING DOORS:
THE RIGHT SOLUTION FOR EVERY BUILDING PROJECT

Criminal police statistics show that burglaries in private homes and apartments are frequent targets for burglars. Other targets include private villas, critical infrastructure, jewelry stores, museums, state institutions and other objects requiring special protection.

According to current statistics, the clearance rate is around 19%.

This means that the protection of these objects and facilities is of particular importance. Poorly secured windows and doors offer little resistance and thus allow intruders or burglars to break in. The risk of detection is usually low.

However, the statistics also show that burglaries can be prevented by security technology. Because the decisive factor is time. Time that our security doors create.

Depending on the architecture, a wide variety of security products in different “security classes” are required with the best possible convenience. Burglar-resistant security lift and slide doors / security sliding systems are increasingly in demand. At Hans Timm Fensterbau, we recognized this development and created solutions in this security segment at an early stage.

We offer burglar-resistant security sliding doors in timber, timber-aluminum and aluminum for a wide range of threat scenarios relating to general crime, violent crime and terrorism.

Whether as a security lift and slide door or as a PSK system, high ease of use, thermal insulation and design can be perfectly combined with maximum security. Narrow profile views ensure large elements with maximum light incidence. In terms of technology and design, all our burglar-resistant security sliding systems offer an equipment and design portfolio that meets all requirements in commercial and private residential construction.

Another option to increase the security of the building and thus the protection against burglary is the use of electronic security components (including alarm glass, alarm sensors, magnetic contacts, bolt contacts), which can be invisibly integrated into the constructions of our security doors. By installing these security components, the windows are monitored for opening, locking and breaching. The components used here comply with the valid VdS classes A, B & C. Our own patented security components for increased convenience and security against burglary round off our portfolio.

Our references in the field of burglar-resistant security sliding doors include federal institutions (e.g. federal ministries, residences of German ambassadors, residential properties of members of various federal and state constitutional bodies, vulnerable public figures and private businesses).

Convince yourself of the quality of our security sliding doors and visit us in our showroom.

We offer you detailed security advice in a private atmosphere.

HIGH SECURITY IN PERFECTION

Certified and externally monitored, object testing possible

TIMM security sliding doors are tested and certified in accordance with DIN EN 1627-1630. External quality audits are regularly carried out by the leading window institute ift Rosenheim to ensure a high level of quality assurance. Thanks to our decades of experience and our extensive test certificates, we can provide you with project-specific special solutions for security sliding doors at short notice if required.

Narrowest views despite high security

TIMM security sliding doors also impress with their delicate design, so that our security sliding doors generally do not differ from the basic security sliding doors. With our slim face widths, we enable a visually appealing and unobtrusive external appearance.

Can be combined with

many additional features

In addition, our Timm security sliding doors can be equipped with many additional components, e.g. monitoring contacts and alarm glass to monitor the doors for opening, locking and breakthrough.

SECURITY SLIDING DOORS, burglar-resistant

RC 2 RC 3 RC 4
Wooden sliding doors check mark = okay check mark = okay check mark = okay
Wood-aluminum sliding doors check mark = okay check mark = okay check mark = okay
Aluminum sliding doors check mark = okay check mark = okay
Steel sliding doors check mark = okay

PRODUCT FAMILY OF BURGLAR-RESISTANT SECURITY SLIDING DOORS

RESISTANCE CLASSES ACCORDING TO DIN EN 1627

RESISTANCE CLASSES DIN EN 1627,
BURGLAR-RESISTANT BUILDING PRODUCTS (RC1, RC2, RC3, RCA, RC5, RC6)

Class Glass Attack weapon Opposition
service life		 Total
test time
RC 1 N No requirement Basic protection against physical violence, counter-kicking, counter-jumping, shoulder throwing, pushing up (only limited protection against lever tools) – –
RC 1 P2A Basic protection against physical violence, counter-kicking, counter-jumping, shoulder throwing, pushing up (only limited protection against lever tools) – –
RC 2 N No requirement Additionally: simple tools such as screwdrivers, pliers and wedges 3 min. 15 min.
RC 2 P4A
3 x ball drop
from a height of 9.0 m		 Additionally: simple tools such as screwdrivers, pliers and wedges 3 min. 15 min.
RC 3 P5A
9 x ball drop
from a height of 9.0 m		 Additionally: hand drill, locksmith’s hammer, wide screwdriver and cow foot 5 min. 20 min.
RC 4 P6B
31 – 50 axe strokes		 Additionally: sawing tools and impact tools such as axe, bolt cutters, tin snips, cordless drill, chisel 10 min. 30 min.
RC 5 P7B
51 – 70 Axe strokes		 In addition: Power tools such as a drill, jigsaw or reciprocating saw and angle grinder 15 min. 40 min.
RC 6 P8B
over 70 axe strokes		 In addition: More powerful power tools than class RC 5 20 min. 50 min.

OUR HIGH-QUALITY SLIDING SECURITY DOORS ARE EXTERNALLY MONITORED

OUR HIGH-QUALITY SECURITY SLIDING DOORS ARE EXTERNALLY MONITORED

All our burglar-resistant security sliding doors are tested and certified against burglary by independent testing institutes in accordance with DIN EN 1627 – 1630 to guarantee the highest security standards.

TIMM SECURITY WINDOW
REGISTERED IN THE POLICE MANUFACTURER DIRECTORY

Tested and certified burglar-resistant security windows

Due to the increasing number of cases of burglary, the topic of burglary protection is also a particular focus of the work of police crime prevention. The aim is to raise public awareness of effective burglary prevention even more intensively than before. Together with cooperation partners from the insurance industry, industry associations and installation companies, the police launched the nationwide publicity campaign K-EINBRUCH.

Registered in the police manufacturer directory

Hans Timm Fensterbau is registered in the list of manufacturers of “tested and certified burglar-resistant windows” published by the police. Our timber windows, timber-aluminum windows and aluminum windows in resistance classes RC2, RC3 and RC4 are therefore considered “unreservedly recommendable” for good burglary protection. We would be happy to advise you in our showroom.

MOST IMPORTANT COMPONENTS FOR SLIDING SAFETY DOORS

Wall connection

In addition to the burglar-resistant element, the wall connection plays a decisive role.

This must be sufficiently stable and have an appropriate strength in accordance with DIN EN 1627 to withstand mechanical attacks.

We ensure professional installation using tested fixing and sealing materials and specially trained installation personnel.

Glazing

Burglar-resistant elements must be fitted with appropriate attack-resistant glazing in accordance with DIN EN 1627.

Burglar-resistant glazing is defined in DIN EN 356.

We use safety glass in various thicknesses, depending on the requirements profile, as toughened safety glass (TSG), laminated safety glass (LSG) and polycarbonate glass (PC) in our systems.

Glass connection

The glass connection of burglar-resistant elements must be designed in accordance with the resistance classes so that it has sufficient stability and strength.

In order to withstand mechanical attacks, e.g. prying open, puncturing or smashing, our burglar-resistant elements, incl. of the glass connections in accordance with DIN EN 1627-1630.

Locking bolt

Thanks to robust locking bolts, we easily achieve resistance class RC2 in accordance with DIN EN 1627-1630.

When equipped with four locking bolts and three pairs of rear locking devices on the sealing rail, resistance class RC3 in accordance with DIN EN 1627-1630 can also be achieved.

Sealing rail with rear grip safety device

The back check devices integrated into the sealing rail stabilize the central closing of the lift and slide doors and enable locking up to resistance class RC3 in accordance with DIN EN 1627-1630.

Locking hook

Swivel hook gearbox: uncompromisingly tight and secure.

Up to three swivel hooks with integrated locking function ensure first-class tight closure and high burglar resistance class RC2 in accordance with DIN EN 1627-1630.

When open, they slide smoothly and wear-free into the frame section via locking rollers.

ADDITIONAL EQUIPMENT AS AN EXTENDED SAFETY MEASURE

Magnetic contacts

Magnetic locking and opening monitoring systems offer individual solutions for intrusion and hazard detection.

The systems monitor the status of the window or sliding element for opening and closing

The components used here comply with the valid VdS classes A, B & C.

Alarm glass

Alarm glass is toughened glass (ESG) that is equipped with an alarm spider (glass breakage detector).

This can be either visible or completely concealed.

The components used here comply with the valid VdS classes C.

SAFETY GLASS FOR BURGLAR RESISTANCE

Our burglar-resistant security windows are generally fitted with security glass in accordance with DIN EN 1627 – 1630 equipped.

Of course, we also use higher-quality safety glazing at the customer’s request.

Attack-resistant glazing is defined in DIN EN 356 and divided into different resistance classes (P-A and P-B classes).

There are two types of attack-resistant glazing: Glass with the suffix “A” is impact-resistant, glass with the suffix “B” is break-through-resistant.

MINIMUM REQUIREMENT FOR GLAZING DIN EN 1627,
BURGLAR-RESISTANT BUILDING PRODUCTS (RC1, RC2, RC3, RC4, RCS, RC6)

Resistance class
according to DIN EN 1627:2021-11		 RC1 RC2 RC3 RC4 RC5 RC6
Resistance class
the glass pane to
EN 356:1999		 P2A
throw-through
inhibiting		 P4A
throw-through
inhibiting		 P5A
throw-through
inhibiting		 P6B
breakthrough-
inhibiting		 P7B
breakthrough-
inhibiting		 P8B
breakthrough-
inhibiting

Safety glasses in the P-A classes

Glasses in the P-A classes are tested with v (DIN EN 356). A metal ball with a diameter of 10 cm and a mass of 4.11 kg is dropped from various heights onto a 110 x 90 cm target. The more film there is between the individual layers of glass, the thicker the pane becomes and the longer it takes for the pane to be broken through.

Penetration-resistant glazing repels spontaneous attacks and offers protection against penetration and vandalism.

For example, a P4A target must withstand the fall of the ball from 9 m three times.

Safety glasses of the P-B classes

Glasses in the P-B classes are tested with a machine-guided axe (DIN EN 356). This involves trying to make a 40 x 40 cm hole in a 110 x 90 cm pane.

The 2 kg axe is struck against the test disk at a speed of 11 m/s (39.6 km/h). The number of strokes simulates the use of different tools.

In deviation from DIN EN 1627, the police recommend the use of glazing in resistance class P6B from resistance class RC3.

A P6B washer, for example, has to withstand between 30 and 50 impacts before it breaks through.

WE USE THREE TYPES OF SECURITY GLASS FOR OUR SECURITY WINDOWS, SECURITY DOORS, SECURITY SLIDING DOORS AND SECURITY FACADES

Toughened
safety glass (ESG)

Toughened safety glass (TSG) is a thermally toughened soda-lime glass in which a strong internal tension is built up through heat treatment. This significantly increases temperature, impact and shock resistance compared to normal float glass. When it breaks, it disintegrates into small, compact cubes, effectively reducing the risk of cuts and impact injuries.

Toughened safety glass (ESG) is mainly used for alarm glass.

Advantages

of toughened safety glass (ESG)

  • Use with alarm glass
  • Increased impact and shock resistance
  • Insensitive to temperature differences
  • Increased flexural strength

In the event of breakage, ESG shatters into many small blunt fragments and triggers the alarm.

Compound
Safety glass (VSG)

Laminated safety glass (LSG) consists of two or more panes with interlayers in between. This is referred to as glass-foil-glass bonding. The number of highly elastic polyvinyl butyral (PVB) films can vary according to the resistance class. The panes are becoming thicker and heavier depending on the safety requirements.

Advantages

of laminated safety glass (VSG)

  • Fragments adhere to foil
  • Bullet-resistant (depending on thickness)
  • Speech inhibiting (depending on thickness)
  • Higher sound insulation

Increased burglary protection, minimized risk of injury.

Polycarbonate
glass (PC)

Polycarbonate (PC) is a thermoplastic and is used in particular when classic laminated safety glass reaches its limits (too thick, too heavy) or customers have a special need for protection.

Polycarbonate glass combines the special properties of glass and polycarbonate. Glass is very scratch-resistant and rigid. Polycarbonate, on the other hand, is very light, impact-resistant and has a relatively soft surface. The combination of the two materials results in very good and highly transparent safety glass that impresses with its high resistance.

Advantages

of polycarbonate glass (PC)

  • Permanently elastic bonding between glass and PC,
    Glass = scratch-resistant + rigid, PC = impact-resistant
  • Very burglar-proof
  • Very bulletproof
  • Very light
  • High strength and rigidity
  • Excellent impact strength

High protection against burglary attempts

OVERVIEW: ALL PRODUCTS

REFERENCES

Wohnhaus Hoch 6

Wohnhaus Pasteurstraße

Hotel am Oranienplatz

Sportschule im Olympiapark – Poelchau-Schule

Olympiapark Berlin – Große Turnhalle

Villa Dahlem

Korkenzieher Haus

Aletto Hotel - Vitra

Wohnhaus Taubert

Villa Wandlitz

Herbert Wehner Haus

Remise Immanuelkirchstrasse

Wohnhaus The Yard

Dachaufstockung Weser-Weichsel-Strasse

Geschäftshaus Greifswalderstrasse

Dachaufstockung Immanuelkrichstrasse

Villa K

Villa Erxleben

Haus Buchthal

Villa B

Bundesministerium für Gesundheit

Wohnhaus Geisberg

Villa I

Thomas-Mann-Haus

DSTRCT. BERLIN. Alter Schlachthof

Wohnhaus TOPAZ Gaillardstraße

Max-Taut-Schule

Bundesministerium für Familie, Senioren, Frauen und Jugend

Das Stue Hotel

Das Soho House Berlin

Staatsbibliothek Unter den Linden

Uhrenmanufaktur A. Lange & Söhne

Bundesministerium für Umwelt, Naturschutz, nukleare Sicherheit und Verbraucherschutz

Bundesministerium für Ernährung und Landwirtschaft

Villa Q

Spore Initiative

SHOWROOM

The most innovative solutions in the industry

On around 850 m² of exhibition space in our showroom, we present the latest and most innovative solutions in the industry from the areas of aluminum windows, wooden windows, wood-aluminum windows and steel windows as well as security windows and facades on over 60 exhibits.

We offer architects, builders and partners in the contract business the opportunity to experience all types and design languages of windows and façades and to be inspired by our versatile product portfolio. We cordially invite you to use this world of experience for your building projects and planning.

Note: Please visit us after making an appointment with us in advance, as our showroom is not designed for the general public and spontaneous visits.

OUR PRODUCTS

open/close all

OUR COMPETENCIES

open/close all

Visions need new innovative solutions. Together with our strong partners (investors, general contractors, architects, project managers), we develop new property-specific solutions and services for the economical and sustainable implementation of your wishes and ideas.

Every property is unique and requires individual solutions for successful implementation. We therefore support architects, investors and building owners at an early stage with targeted advice and digital services in the search, selection and planning of suitable constructions.

According to the motto “replacing chance with planning”, planning reliability has always been very important to us. With our professional planning department and experienced project managers, we design your specific project solutions using the latest CAD technology.

In our three ultra-modern Berlin plants with > 100 productive employees, we combine many years of experience with state-of-the-art CNC technology with end-to-end digitalization and a high level of automation for optimum process efficiency. Our high level of vertical integration and high degree of prefabrication enable time-saving assembly processes on the construction site.

Thanks to our own fleet of trucks and the use of our own logistics equipment, we generally deliver to our properties just in time, including to protect the elements on site. The professional installation of windows, doors and façade elements is carried out by experienced, specialized and well-coordinated installation teams.

To ensure the long-term value retention and thus the functional safety and usability of the structures, we provide you with personal support from our own specialists even after completion of the construction project.

WHERE TO FIND US

TIMM CONTACT

Hans Timm Fensterbau GmbH & Co KG
Motzener Str. 10
D-12277 Berlin


Consultation & quotation requests:

anfrage@timm-fensterbau.de
+49 30 720 831-70

Service, repair and maintenance requests:
service@timm-fensterbau.de
+49 30 720 831-60
 
Head office:
info@timm-fensterbau.de
+49 30 720 831-0

TIMM NEWSLETTER

We provide you with service and industry news and news about our products at irregular intervals!

PLANNING MANUAL / WINDOW GUIDE

With the TIMM planning manual, you can quickly find the right product. Request your free copy now!