BURGLAR-RESISTANT SECURITY DOORS – GUARANTEEING MAXIMUM PROTECTION WITH MAXIMUM FUNCTIONALITY

Criminal police statistics show that burglaries in private homes and apartments are frequent targets for burglars. Other targets include private villas, critical infrastructure, jewelry stores, museums, state institutions and other objects requiring special protection.

According to current statistics, the clearance rate is approx. 19 %.

This means that the protection of these objects and facilities is of particular importance. Poorly secured windows and doors offer little resistance and therefore allow people to break in or break out. The risk of detection is usually low. However, the statistics also show that burglaries can be prevented by security technology. Because the decisive factor is time. Time that our security doors create.

Doors are the calling card of the house. In addition to the appearance and design, they must guarantee the desired protection – whether in private or public areas – regardless of the type of material, shape and opening method. We offer burglar-resistant security doors in wood, wood-aluminum, aluminum and steel for a wide range of threat scenarios relating to general crime, violent crime and terrorism.

Our security doors combine long-lasting functional security with high-quality design. Whether as a stylish front door or a high-traffic commercial door, our pioneering systems offer architects and planners reliable and user-oriented solutions for every security requirement – with a wide range of design options.

Criminal police statistics show that burglaries in private homes and apartments are frequent targets for burglars. All our burglar-resistant security doors are certified against burglary by independent testing institutes in accordance with DIN EN 1627 – 1630 in the form of a static, dynamic and manual tool test to ensure the highest security standards.

Another way to increase the security of the building and thus the protection against burglary is to use electronic security components (including alarm glass, alarm sensors, magnetic contacts, bolt contacts), which can be invisibly integrated into the constructions of our security doors. By installing these security components, the windows are monitored for opening, locking and breaching. The components used here comply with the valid VdS classes A, B & C. Our own patented security components for increased convenience and security against burglary round off our portfolio.

Our references in the field of burglar-resistant security doors include federal facilities (e.g. federal ministries, offices of various constitutional bodies), EU country representations, German embassies, residences of German ambassadors, residential properties of members of various federal and state constitutional bodies, people at risk from politics, business and other areas of public life, courts, police and military facilities and Jewish facilities.

See the quality of our security doors for yourself and visit us in our showroom.

We offer you detailed security advice in a private atmosphere.

HIGH SECURITY IN PERFECTION

Certified and externally monitored – object testing possible

TIMM security doors are tested and certified in accordance with DIN EN 1627-1630. External quality audits are regularly carried out by the leading window institute ift Rosenheim to ensure a high level of quality assurance. Thanks to our decades of experience and our extensive test certificates, we can provide you with project-specific special solutions for security doors at short notice if required.

Narrowest views despite high security

TIMM security doors also impress with their delicate design, so that our security doors generally do not differ from the basic security doors. With our slim face widths, we enable a visually appealing and unobtrusive external appearance.

Can be combined with bullet resistance and many additional features

Thanks to “multi-certification” and our high level of expertise, our TIMM security doors can be combined with bullet and blast protection or fire and smoke protection requirements. In addition, our Timm security doors can be equipped with many additional components, e.g. monitoring contacts and alarm glass to monitor the doors for opening, locking and breaching.

SECURITY DOORS, burglar-resistant

RC 2 RC 3 RC 4 RC 5 RC 6
Wooden doors check mark = okay check mark = okay check mark = okay
Wood-aluminum doors check mark = okay check mark = okay check mark = okay
Aluminum doors check mark = okay check mark = okay check mark = okay
Steel doors check mark = okay check mark = okay check mark = okay check mark = okay check mark = okay

PRODUCT FAMILY OF BURGLAR-RESISTANT SECURITY DOORS

RESISTANCE CLASSES ACCORDING TO DIN EN 1627

RESISTANCE CLASSES DIN EN 1627,
BURGLAR-RESISTANT BUILDING PRODUCTS (RC1, RC2, RC3, RCA, RC5, RC6)

Class Glass Attack weapon Opposition
service life		 Total
test time
RC 1 N No requirement Basic protection against physical violence, counter-kicking, counter-jumping, shoulder throwing, pushing up (only limited protection against lever tools) – –
RC 1 P2A Basic protection against physical violence, counter-kicking, counter-jumping, shoulder throwing, pushing up (only limited protection against lever tools) – –
RC 2 N No requirement Additionally: simple tools such as screwdrivers, pliers and wedges 3 min. 15 min.
RC 2 P4A
3 x ball drop
from a height of 9.0 m		 Additionally: simple tools such as screwdrivers, pliers and wedges 3 min. 15 min.
RC 3 P5A
9 x ball drop
from a height of 9.0 m		 Additionally: hand drill, locksmith’s hammer, wide screwdriver and cow foot 5 min. 20 min.
RC 4 P6B
31 – 50 axe strokes		 Additionally: sawing tools and impact tools such as axe, bolt cutters, tin snips, cordless drill, chisel 10 min. 30 min.
RC 5 P7B
51 – 70 Axe strokes		 In addition: Power tools such as a drill, jigsaw or reciprocating saw and angle grinder 15 min. 40 min.
RC 6 P8B
over 70 axe strokes		 In addition: More powerful power tools than class RC 5 20 min. 50 min.

OUR HIGH-QUALITY SECURITY DOORS ARE EXTERNALLY MONITORED

OUR HIGH-QUALITY SECURITY DOORS ARE EXTERNALLY MONITORED

All our burglar-resistant security doors are tested and certified against burglary by independent testing institutes in accordance with DIN EN 1627 – 1630 to guarantee the highest security standards.

TIMM SECURITY WINDOW
REGISTERED IN THE POLICE MANUFACTURER DIRECTORY

Tested and certified burglar-resistant security windows

Due to the increasing number of cases of burglary, the topic of burglary protection is also a particular focus of the work of police crime prevention. The aim is to raise public awareness of effective burglary prevention even more intensively than before. Together with cooperation partners from the insurance industry, industry associations and installation companies, the police launched the nationwide publicity campaign K-EINBRUCH.

Registered in the police manufacturer directory

Hans Timm Fensterbau is registered in the list of manufacturers of “tested and certified burglar-resistant windows” published by the police. Our timber windows, timber-aluminum windows and aluminum windows in resistance classes RC2, RC3 and RC4 are therefore considered “unreservedly recommendable” for good burglary protection. We would be happy to advise you in our showroom.

MOST IMPORTANT COMPONENTS FOR SECURITY DOORS

Wall connection

In addition to the burglar-resistant element, the wall connection plays a decisive role.

This must be sufficiently stable and have an appropriate strength in accordance with DIN EN 1627 to withstand mechanical attacks.

We ensure professional installation using tested fixing and sealing materials and specially trained installation personnel.

Glazing

Burglar-resistant elements must be fitted with appropriate attack-resistant glazing in accordance with DIN EN 1627.

Burglar-resistant glazing is defined in DIN EN 356.

We use safety glass in various thicknesses, depending on the requirements profile, as toughened safety glass (TSG), laminated safety glass (LSG) and polycarbonate glass (PC) in our systems.

Glass connection

The glass connection of burglar-resistant elements must be designed in accordance with the resistance classes so that it has sufficient stability and strength.

In order to withstand mechanical attacks, e.g. prying open, puncturing or smashing, our burglar-resistant elements, incl. of the glass connections in accordance with DIN EN 1627-1630.

Safety set

In order to guarantee the protection of the mechanical locking points, protective fittings must be used for security doors in accordance with the DIN 18257 and DIN EN 1906 standards, or their suitability must be proven in an element test in accordance with DIN EN 1627-1630.

These are combined with a locking cylinder that is classified in accordance with DIN 18252 or DIN EN 1303.

Multi-point locking

To ensure that the door is securely locked, we generally use high-quality multi-point locks of various designs.

The 3- or 5-point locking systems must be classified in accordance with the DIN 18251 standard or have proven their suitability in an element test in accordance with DIN EN 1627-1630.

In special cases, mortise locks can also achieve the resistance class.

Hinges & hinge side locks

For a stable connection of the door leaf to the frame, sufficiently dimensioned door hinges are required which, in addition to the door weight, can also withstand the static, dynamic and manual forces exerted during an attempted break-in.

These hinges can be supplemented with hinge side protectors, which also secure the rebate.

The suitability of the hinge side solutions must be verified by a corresponding element test in accordance with DIN EN 1627-1630.

PROTECTIVE FITTINGS FOR BURGLAR-RESISTANT SECURITY DOORS

ALLOCATION OF THE INDIVIDUAL RESISTANCE CLASSES TO PROTECTIVE FITTINGS WITHIN THE SCOPE OF INTERCHANGEABILITY DIN EN 1627,
BURGLAR-RESISTANT BUILDING PRODUCTS (RC1, RC2, RC3, RC4)

Resistance class
according to DIN EN 1627:2021-11		 RC1 RC1 N RC2 N RC2 RC3 RC4
Protective fittings
DIN 18257:2015-06
Resistance class		 ES 0
alternative
ES 1-ZA		 ES 0
alternative
ES 1-ZA		 ES 0
alternative
ES 1-ZA		 ES 1
alternative
ES 1-ZA		 ES 2
alternative
ES 2-ZA		 ES 3
alternative
ES 3-ZA

ADDITIONAL EQUIPMENT AS AN EXTENDED SAFETY MEASURE

Magnetic contacts

Magnetic locking and opening monitoring systems offer individual solutions for intrusion and hazard detection.

The systems monitor the status of the window or sliding element for opening and closing

The components used here comply with the valid VdS classes A, B & C.

Alarm glass

Alarm glass is toughened glass (ESG) that is equipped with an alarm spider (glass breakage detector).

This can be either visible or completely concealed.

The components used here correspond to the valid VdS classes C.

Bolt switch contact

Electromechanical lock monitoring systems offer individual solutions for intrusion and hazard detection.

The systems monitor the locking status of the door element.

The components used here comply with the valid VdS classes C.

SAFETY GLASS FOR BURGLAR RESISTANCE

Our burglar-resistant security windows are generally fitted with security glass in accordance with DIN EN 1627 – 1630 equipped.

Of course, we also use higher-quality safety glazing at the customer’s request.

Attack-resistant glazing is defined in DIN EN 356 and divided into different resistance classes (P-A and P-B classes).

There are two types of attack-resistant glazing: Glass with the suffix “A” is impact-resistant, glass with the suffix “B” is break-through-resistant.

MINIMUM REQUIREMENT FOR GLAZING DIN EN 1627,
BURGLAR-RESISTANT BUILDING PRODUCTS (RC1, RC2, RC3, RC4, RCS, RC6)

Resistance class
according to DIN EN 1627:2021-11		 RC1 RC2 RC3 RC4 RC5 RC6
Resistance class
the glass pane to
EN 356:1999		 P2A
throw-through
inhibiting		 P4A
throw-through
inhibiting		 P5A
throw-through
inhibiting		 P6B
breakthrough-
inhibiting		 P7B
breakthrough-
inhibiting		 P8B
breakthrough-
inhibiting

Safety glasses in the P-A classes

Glasses in the P-A classes are tested with falling balls (DIN EN 356). A metal ball with a diameter of 10 cm and a mass of 4.11 kg is dropped from various heights onto a 110 x 90 cm target. The more film there is between the individual layers of glass, the thicker the pane becomes and the longer it takes for the pane to be broken through.

Penetration-resistant glazing repels spontaneous attacks and offers protection against penetration and vandalism.

For example, a P4A target must withstand the fall of the ball from 9 m three times.

Safety glasses of the P-B classes

Glasses in the P-B classes are tested with a machine-guided axe (DIN EN 356). This involves trying to make a 40 x 40 cm hole in a 110 x 90 cm pane.

The 2 kg axe is struck against the test disk at a speed of 11 m/s (39.6 km/h). The number of strokes simulates the use of different tools.

In deviation from DIN EN 1627, the police recommend the use of glazing in resistance class P6B from resistance class RC3.

A P6B washer, for example, has to withstand between 30 and 50 impacts before it breaks through.

WE USE THREE TYPES OF SECURITY GLASS IN OUR SECURITY WINDOWS, SECURITY DOORS, SECURITY SLIDING DOORS AND SECURITY FACADES

Toughened
safety glass (ESG)

Toughened safety glass (TSG) is a thermally toughened soda-lime glass in which a strong internal tension is built up through heat treatment. This significantly increases temperature, impact and shock resistance compared to normal float glass. When it breaks, it disintegrates into small, compact cubes, effectively reducing the risk of cuts and impact injuries.

Toughened safety glass (ESG) is mainly used for alarm glass.

Advantages

of toughened safety glass (ESG)

  • Use with alarm glass
  • Increased impact and shock resistance
  • Insensitive to temperature differences
  • Increased flexural strength

In the event of breakage, ESG shatters into many small blunt fragments and triggers the alarm.

Compound
Safety glass (VSG)

Laminated safety glass (LSG) consists of two or more panes with interlayers in between. This is referred to as glass-foil-glass bonding. The number of highly elastic polyvinyl butyral (PVB) films can vary according to the resistance class. The panes are becoming thicker and heavier depending on the safety requirements.

Advantages

of laminated safety glass (VSG)

  • Fragments adhere to foil
  • Bullet-resistant (depending on thickness)
  • Speech inhibiting (depending on thickness)
  • Higher sound insulation

Increased burglary protection, minimized risk of injury.

Polycarbonate
glass (PC)

Polycarbonate (PC) is a thermoplastic and is used in particular when classic laminated safety glass reaches its limits (too thick, too heavy) or customers have a special need for protection.

Polycarbonate glass combines the special properties of glass and polycarbonate. Glass is very scratch-resistant and rigid. Polycarbonate, on the other hand, is very light, impact-resistant and has a relatively soft surface. The combination of the two materials results in very good and highly transparent safety glass that impresses with its high resistance.

Advantages

of polycarbonate glass (PC)

  • Permanently elastic bonding between glass and PC,
    Glass = scratch-resistant + rigid, PC = impact-resistant
  • Very burglar-proof
  • Very bulletproof
  • Very light
  • High strength and rigidity
  • Excellent impact strength

High protection against burglary attempts

OVERVIEW: ALL PRODUCTS

REFERENCES

Wohnhaus Hoch 6

Wohnhaus Pasteurstraße

Hotel am Oranienplatz

Sportschule im Olympiapark – Poelchau-Schule

Olympiapark Berlin – Große Turnhalle

Villa Dahlem

Korkenzieher Haus

Aletto Hotel - Vitra

Wohnhaus Taubert

Villa Wandlitz

Herbert Wehner Haus

Remise Immanuelkirchstrasse

Wohnhaus The Yard

Dachaufstockung Weser-Weichsel-Strasse

Geschäftshaus Greifswalderstrasse

Dachaufstockung Immanuelkrichstrasse

Villa K

Villa Erxleben

Haus Buchthal

Villa B

Bundesministerium für Gesundheit

Wohnhaus Geisberg

Villa I

Thomas-Mann-Haus

DSTRCT. BERLIN. Alter Schlachthof

Wohnhaus TOPAZ Gaillardstraße

Max-Taut-Schule

Bundesministerium für Familie, Senioren, Frauen und Jugend

Das Stue Hotel

Das Soho House Berlin

Staatsbibliothek Unter den Linden

Uhrenmanufaktur A. Lange & Söhne

Bundesministerium für Umwelt, Naturschutz, nukleare Sicherheit und Verbraucherschutz

Bundesministerium für Ernährung und Landwirtschaft

Villa Q

Spore Initiative

SHOWROOM

Die innovativsten Lösungen der Branche

Auf rund 850 m² Ausstellungsfläche präsentieren wir Ihnen in unserem Showroom an über 60 Exponaten die aktuellsten und innovativsten Lösungen der Branche aus den Bereichen Aluminiumfenster, Holzfenster, Holz-Alu Fenster und Stahlfenster sowie Sicherheitsfenster und Fassaden.

Architekten, Bauherren und Partnern im Objektgeschäft bieten wir die Möglichkeit, alle Arten und Designsprachen von Fenstern und Fassaden zu erleben und sich von unserem vielseitigen Produktportfolio begeistern zu lassen. Wir laden Sie herzlich ein, diese Erlebniswelt für Ihre Bauvorhaben und Planungen zu nutzen.

Hinweis: Bitte besuchen Sie uns nach einem vorab mit uns vereinbarten Beratungstermin, da unser Showroom nicht auf Publikumsverkehr und spontane Besuche ausgerichtet ist.

OUR PRODUCTS

open/close all

OUR COMPETENCIES

open/close all

Visions need new innovative solutions. Together with our strong partners (investors, general contractors, architects, project managers), we develop new property-specific solutions and services for the economical and sustainable implementation of your wishes and ideas.

Every property is unique and requires individual solutions for successful implementation. We therefore support architects, investors and building owners at an early stage with targeted advice and digital services in the search, selection and planning of suitable constructions.

According to the motto “replacing chance with planning”, planning reliability has always been very important to us. With our professional planning department and experienced project managers, we design your specific project solutions using the latest CAD technology.

In our three ultra-modern Berlin plants with > 100 productive employees, we combine many years of experience with state-of-the-art CNC technology with end-to-end digitalization and a high level of automation for optimum process efficiency. Our high level of vertical integration and high degree of prefabrication enable time-saving assembly processes on the construction site.

Thanks to our own fleet of trucks and the use of our own logistics equipment, we generally deliver to our properties just in time, including to protect the elements on site. The professional installation of windows, doors and façade elements is carried out by experienced, specialized and well-coordinated installation teams.

To ensure the long-term value retention and thus the functional safety and usability of the structures, we provide you with personal support from our own specialists even after completion of the construction project.

WO SIE UNS FINDEN

TIMM KONTAKT

Hans Timm Fensterbau GmbH & Co. KG
Motzener Str. 10
D-12277 Berlin

Beratungs- & Angebotsanfragen:
anfrage@timm-fensterbau.de
+49 30 720 831-70

Service-, Reparatur- und Wartungsanfragen:
service@timm-fensterbau.de
+49 30 720 831-60
 
Zentrale:
info@timm-fensterbau.de
+49 30 720 831-0

You are currently viewing a placeholder content from Google Maps. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.

More Information
Unblock content Accept required service and unblock content

TIMM NEWSLETTER

We provide you with service and industry news and news about our products at irregular intervals!

PLANNING MANUAL / WINDOW GUIDE

With the TIMM planning manual, you can quickly find the right product. Request your free copy now!